2 interface connection – INFICON PSG55x ATM to Medium Vacuum Gauge (DeviceNet) User Manual
Page 7

tira58e1-a (2012-03) PxG5xx.cp
7
2 Interface
Connection
For operating the PCG5xx / PSG5xx gauge via DeviceNet, an interface cable
conforming to the DeviceNet standard is required.
If no such cable is available, make one according to the following indications.
A shielded special 5 conductor cable conforming to the DeviceNet standard has to
be used (
→ [3] and [4]).
Make the DeviceNet interface cable according to the following indications:
3
1
4
2
5
Micro-Style, 5-pin,
(DeviceNet)
female, soldering side
Pin
1 Drain
Pin 2 Supply
+15 … +30 VDC
Pin 3 Supply common
GND
Pin
4 CAN_H
Pin
5 CAN_L
Pin assignment of the FCC, D-Sub and Hirschmann sensor connector
according to the respective operating manual (
→ [1], [2].
Plug the DeviceNet (and sensor) cable connector into the gauge.
DeviceNet cable
Lock the DeviceNet (and sensor) cable connector.
Making a DeviceNet interface
cable
Cable type
Procedure