INFICON PSG55x ATM to Medium Vacuum Gauge (DeviceNet) - Manual (Page 12)

12
tira58e1-a (2012-03) PxG5xx.cp
Class Code 01
h
= 01
d
This object provides identification of and general information about the device.
Attribute ID Access rule Name DeviceNet
data type Description of attribute Semantics of values
1 Get Revision UINT Revision of this object. The current value assigned to this
attribute is one (01). If updates that
require an increase in this value are
made, then the value of this attribute
increases by one.
2 Get Max instance UINT Maximum instance number of
an object currently created in
this class level of the device. The largest Instance number of a
created object at this class hierarchy
level.
Attribute ID Access rule NV/V Name DeviceNet data type Description of attribute
1 Get NV Vendor ID UINT Manufacturer identification
Value: 633 (INFICON AG) (default)
2 Get NV Device type UINT 1C
h
= Vacuum pressure gauge
3 Get NV Product code UINT → "Semantics" section below
4 Get NV Revision STRUCT Major Revision 1; Minor Revision 1
5 Get NV Status WORD
6 Get NV Serial number UDINT
7 Get NV Product name SHORT STRING → "Semantics" section below
100 Get NV Software Revision
Level
SHORT STRING Revision of the DeviceNet board software
(major number) (minor number)
(development number)
e.g. 01 02 00
Relationship between product code and product name.
Product code Sensor type Product name
19 CDG, Pirani PCG550, PCG552, PCG554
20 CDG, Pirani, ATM PCG550, PCG552, PCG554
21 Pirani PSG550, PSG552, PSG554
Service Code Name Description
5 (05
h
) Reset 0 = last installation,
1 = default installation (factory reset)
14 (0E
h
) Get_Attribute_Single
4.2 Identity Object
4.2.1 Class Attributes
4.2.2 Instance Attributes
4.2.3 Semantics
4.2.4 Services