INFICON SID-142 Thin Film Deposition Controller - Manual (Page 23)

Chapter 2 Quick Start
2-14
Edit Silver
Conditioning Select the “Condition” tab and the Silver Sample layer. Set
each parameter to the values shown below.
Save Edits Click “Close Form” or press the first SoftKey to save this two-
layer codeposition process. Answer Yes if it displays the “Do
you want to change….” message box to make this the current
process.
Start
Process Press the “START SIMULATE” SoftKey to start the first layer
preconditioning phases. Note that two outputs are displayed
for this codeposition layer.
Preconditioning of the two materials is entirely independent. If the preconditioning of
one layer takes longer than the other, the start times are adjusted so that the end times
coincide.
When preconditioning ends, codeposition of the two materials begins.