HYDAC ENS 3000 - Manual (Page 2)

E
2
Contents
Page
1. Functions of the ENS 3000 3
2. Installation 3
3. Commissioning 5
4. Operating controls of the ENS 3000 6
5. Digital display 6
6. Output signals
6.1. SWITCHING OUTPUTS 8
6.1.1 Switching point (SP) mode 8
6.1.2 Window (WIN) mode 8
6.2. ANALOGUE OUTPUT 9
6.3. SETTING THE SWITCHING POINTS AND
HYSTERESES OR SWITCHING RANGES FOR THE
WINDOW MODE
9
6.4. SETTING RANGES FOR
SWITCHING OUTPUTS 11
6.5. SETTING RANGES FOR THE OFFSET 12
7. Basic settings
7.1. ALTERING THE BASIC SETTINGS 13
7.2. SUMMARY OF THE BASIC SETTINGS 14
8. Re-setting the peak values 17
9. Programming enable
9.1. ALTERING THE OPERATING
PROGRAMMING ENABLE 17
9.2. ALTERING THE MAIN
PROGRAMMING ENABLE 18
10. Error messages 19
11. Pin connection
11.1. PIN CONNECTION WITH 1 OR 2 SWITCHING
POINTS 21
11.2. PIN CONNECTION WITH 4 SWITCHING POINTS 21
12. Technical specifications
12.1. ENS 3000 WITHOUT
TEMPERATURE SENSOR 22
12.2. ENS 3000 WITH TEMPERATURE SENSOR 53
13. Ordering information 54
14. Accessories
14.1. ELECTRICAL CONNECTION 25
14.2. MECHANICAL CONNECTION 27
15. Dimensions 28
16. Application examples 29