HYDAC ENS 3000 - Manual (Page 17)

E
17
8. Resetting the peak values
The ENS 3000 has an option for resetting the peak values of fluid level and
temperature (depending on the model). To reset a peak value, proceed as
follows:
9. Programming enable
The ENS 3000 has two types of programming enable, both of which must be
set to "enabled" before the settings may be altered. The operating
programming enable may be set or cancelled during operation. It provides
protection against unintentional alterations of settings.
Programming disable via the main programming enable means that no change
to the settings can be carried out during operation. This serves, for example, as
a safety function or as a protection against unauthorised alterations.
9.1 ALTERING
THE OPERATING PROGRAMMING ENABLE
→
ž
3s
→
Press both arrow keys
simultaneously and hold
them down for 3 s.
HYDAC
mode
?
?
HYDAC
mode
fluid level indication
→
ž
3s
HYDAC
mode
? ?
Press both arrow keys
simultaneously and hold
them down for 6 s.
Display
(release
arrow keys)
FrEE
= programming enabled
Loc
= programming disabled
Use the or keys to change the setting
→
ž
6s
HYDAC
mode
? ?
fluid level indication
→
ž
3s
→
ž
2s