HYDAC ENS 3000 - Manual (Page 13)

E
13
7. Basic settings
The function of the ENS 3000 can be adapted to suit the particular application
by altering several basic settings. These settings have been combined in a
menu.
7.1 ALTERING THE BASIC SETTINGS
Important note:
When the "basic setting" menu is activated, no switching operations will be
carried out!
Activating the basic settings menu:
To exit the "Basic Settings" menu:
Select the "END" menu item, select "YES", and the ENS 3000 returns to normal
display mode after 2s.
Note:
If no key is pressed for approx. 25 seconds, the menu closes automatically, and
any changes that may have been made will not be saved.
press the "mode" key
and hold it down.
Switch on the supply volltage
(hold key down until "MEnu"
appears in the display)
Display
(release the
"mode" key)
press the "mode" key until
the required menu item
appears, then release the
"mode" key
(see Point 7.2 for a
summary of menu points)
→ →
ž
3s
→
HYDAC
mode ?
HYDAC
mode
? ?
HYDAC
mode ?
use the and keys to
change the setting, and then
select the next menu item.
(niv. = fluid level)