Heidolph Hei-VAP Precision - Manual (Page 32)

Operation Operation
62 63
I. II. III. 1.
2.
“click”
“click”
2.
1.
2 x
1. Attach the control panel back to the basic device.
In order to be able to control the immersion depth of the evaporator flask, the height of
the drive unit must be adjusted.
Only immerse the flask so far in the heating bath, so that it does not
contact the edge or the bottom of the bath.
1 Hand lift 2 Motor lift arrow keys
Figure 4-5: Hand/motor lift
2 1
Operating the lift
Version Hei-VAP Advantage, Hei-VAP Precision (motor lift)
The base unit is installed.
Press the respective arrow key (up/down) (see Figure 4-5 (2)) and release the
pushbutton at the desired position of the drive unit.
The drive unit remains in the proper position set by the operator.
Version Hei-VAP Value, Hei-VAP Advantage, Hei-VAP Precision
(hand lift)
1. Push the hand lift (1) down and shift to the left (lower) or right (upward) while
keeping the handle depressed.
2. Release the hand lift (1) at the desired position.
The drive unit snaps into the appropriate position when released.