Heidolph Hei-VAP Precision - Manual (Page 30)

Operation
59 58
Switching on the base unit
Switching on the base unit
1. Switch on the base unit by pressing the toggle switch of the power switch.
2. The power switch of the base unit must be in the “1” position.
1 Power switch 2 Temperature sensor connector
Figure 5-1: Base unit
1
2
Operating the control panel
The control panel can be removed from the base unit.
The 1.3 m connecting cable between the control panel and the base unit
can be adjusted to the optimal length by a cable run and reel.
The control panel can therefore be placed on a shelf and offers a slight
inclination for a view from above.
The control panel can be attached to a wall by pre-fabricated holes or by
an enclosed Velcro-connection.
Figure 4-31: Control panel (for Hei-VAP Precision)
1. Grasp the control panel on the left and pull it forward from the base unit.
Avoid pressure on the LCD screen.