ETC CEM3 v1.5.1 - Manual (Page 23)

2
System Reference 17
Menu Structure
This section lays out the entire menu structure for the software. Press the desired button to
access the menu items below. Use the standard navigation method to select and enter
options in the menus (see Navigation, page 6 ).
Test
Set Levels
Set levels for all circuits in a space.
Dimmer Check
Quickly run through all circuits in a space to test their output at a given percentage.
Release Set Levels
Release any active levels for a given space at once.
Presets
Record or play back presets. See Recording and Playing Back Presets, page 32 .
Record Rig Check
Records a rig check preset to facilitate AF reporting. See Rig Check, page 13 and
Advanced Features (AF), page 10 for more information.
Run Rig Check
Runs a rig check preset. You will be notified of any load inconsistencies found during the
rig check.
Clear Rig Check
Clears the recorded rig check from the CEM3.
About
Dimmers
View all properties for any circuit in a space. See Dimmer Property Definitions, page 19 .
Rack
View all properties for the host Sensor rack. See Rack Property Definitions, page 22 .
Errors
View any current errors or other status messages. See Error Messages, page 47 .
Source Info
View the current control source (Highest-Takes-Precedence or “HTP”) and related output
level being received by all circuits in a space.
About CEM3
Download a PDF of the CEM3 User Manual to a connected USB drive.