Quick start, Install, Focus – ETC Desire Series XTI v1.6.0 User Manual

Page 43: Configure, A p p e n d i x a, Install focus configure, Appendix a quick start

Quick Start

Appendix A
Quick Start

This section will help you to quickly use the Desire XTI Series fixture. For complete, detailed

information and step-by-step instructions, see

Install

Step 1:

Hang or mount the fixture using the provided hardware and approved hardware

accessories.

Step 2:

Attach an approved safety cable.

Step 3:

Install a secondary lens, if needed, with the smooth side out.

Step 4:

Attach additional accessories (half shield, louver, etc.), if needed, onto the

fixture.

Focus

Step 1:

Using an RDM configuration tool or DMX/RDM control device, turn the fixture on

to full intensity.

Step 2:

Adjust the fixture's position as needed.

Step 3:

When focusing is complete, return the fixture to normal operation.

Configure

Set DMX Address

Step 1:

Using an RDM configuration tool or RDM lighting control device, set the address

of the fixture.