Safety – ETC Desire Series XTI v1.6.0 User Manual
Page 10
5
Desire XTI Series v1.6.0 User Manual
Safety
The Desire series fixtures are intended for professional use only. Read entire User Manual
before using equipment.
W A R N I N G :
Note the following safety warnings before use:
• Do not mount the Desire XTI fixture on or near a flammable surface.
• Mount and support the fixture only by the primary suspension holes in the yoke or
mounting brackets.
• Mount the fixture from a suitable structure using only the hardware rated for the weight
of the fixture.
• In addition to primary suspension, attach a safety cable (ETC Model 400SC or other
approved safety cable or device) to the fixture housing. Appropriate attachment point
(hole) is provided in the protruding tab on the fixture housing.
• Disconnect the unit from power before all cleaning and maintenance.
• Maximum recommended ambient operating temperature: Ta=40°C (104°F)
• Maximum anticipated external surface temperature: Tmax=80°C (158°F)
• External temperature after 5 minutes of full-brightness operation and 23°C (74°F)
ambient: 38°C (100°F)
• External Temperature (steady state achieved) at 23°C (74°F): 70°C (158°F)