ElmoMC SimplIQ Servo Drives Composer User Manual - Manual (Page 76)

The Table Editor dialog box contains the following elements:
ƒ
The PT or PVT table, with columns for node ID, and relevant parameters.
ƒ Repetitive check box, to select/deselect repetitive mode.
ƒ For PT tables, a Time text box to select the number of sample times (S.T.) per
time unit.
ƒ Download command button for downloading the table.
4. Edit the table as needed.
Note:
To open an “empty” PVT or PT file, you can select Tools - Table Editor -
PVT or Tools - Table Editor - PT, as appropriate. A Table Editor window
will be opened with the relevant empty table, as in the following examples:
3.7.3 Downloading a Table to a Drive
Once you have modified your PVT or PT table and saved it, you are ready to download it
to the driver selected in the Active Communication drop-down list.
To download your table:
1. Select/deselect the Repetitive checkbox as needed.
2. In the Active Communication drop-down list, be sure that the CANopen node of the
selected driver is correct.
Elmo Composer User Manual Using the Composer
MAN-COMPUM (Ver. 1.9)
3-26