ElmoMC SimplIQ Servo Drives Composer User Manual - Manual (Page 47)

Note:
Clicking Cancel at any stage of this final process will restore all the
parameters that were modified in this Wizard session and will complete the
Wizard process.
3. When you are satisfied that all the setup information is final, click Finish. The Save
As dialog box will be displayed for you to enter the path and file name for saving the
file. The actual data will be saved in the drive memory. This step may take some
time, and the progress will be indicated by a status bar displayed by the Wizard.
Upon completion, the Composer Smart Terminal (
section 3.3 ) will be displayed.
2.13 Composer Shortcuts
2.13.1 Opening an Existing Application
To access a previously-saved application:
ƒ
By clicking Open an Existing Application from the Welcome to Composer
Application window displayed when you first access the Composer (
section 2.2 )
ƒ By clicking the
button in the Composer toolbar
ƒ By selecting File – Open New Application from the Composer menu bar
The Open Existing Application dialog box will be displayed:
Composer User Manual Using the Wizard
MAN-COMPUM (Ver. 1.9)
2-6