ElmoMC SimplIQ Servo Drives Composer User Manual - Manual (Page 11)

The Application Name and Communication Type dialog box will be displayed, as
follows:
This dialog box enables you to name your new application and to define the
communication type used with it.
1. In the Application Name text box, type a name that clearly defines the new
application. The parameters for the communications option last used by the host for
the drive application are displayed in the Last Successful Communication
Properties text box.
2. To display the parameters of a different communication type (RS-232 or CAN), click
the relevant option in the Select Communication Type block. The parameters last
used by the host for that type of communication (if any) will be displayed in the Last
Successful Communication Properties text box.
3. If you are satisfied with the parameters displayed in the Last Successful
Communication Properties text box, click Next to activate the connection and begin
specifying your motor parameters (continue to
section 2.4 ). If you wish to change
any parameter for your selected communication type, click Properties. The relevant
dialog box will be displayed (sections
2.3.1 and 2.3.2 ).
Composer User Manual Using the Wizard
MAN-COMPUM (Ver. 1.9)
2-3