ElmoMC SimplIQ Servo Drives Composer User Manual - Manual (Page 13)

4. From the Manufacturer drop-down list, select the name of the board manufacturer.
5. From the Board Type drop-down list, select the name of the CAN board installed in
your computer.
6. In the CAN Number text box, type the number of the on-board controller (0 or 1)
defined in the board setup process. The Segment Address and the IRQ value,
defined during CAN installation, are displayed here only for reference.
7. Click Connect to activate the CAN network connection. This process may take a bit
of time, and the Composer will display a status bar to indicate connection progress.
8.
2.4 Specifying the Motor Parameters
After defining your communication type and making the connection, the next step in
drive setup is to define your motor parameters. You do this in the System Database
dialog box, displayed when you click Next in the Application Name and Communication
Type dialog box:
Composer User Manual Using the Wizard
MAN-COMPUM (Ver. 1.9)
2-5