ElmoMC ExtrIQ Digital Servo Drives-Eagle - Manual (Page 3)

Revision History
Version Date Details
1.0 June 2007 Initial release
1.1 April 2008 Updated Power Ratings Table in Chapter 4 (Appendix)
1.2 May 2008 Following sections added: 3.4.2.2 Connecting the DC
Power; 3.5 DC Power Supply; 3.6 Heat Dissipation
1.3 December
2008 MTCR 00-100-30: Auxiliary power supply is mandatory for
Eagle XX/400 drives
1.4 May 2009 MTCR 05-009-54: Section 3.4.2.2.a: Expanded the XX/400
note; Section 4.3: Added auxiliary power data for EAG
18/400.
1.5 October 2010 MTCR 10-01-10: Correction in Table 16
1.6 July 2011 Applied new template
1.7 September
2012 PR changed to VN-
Formatted according to the new template
“Metronome” was replaced by the “Composer” software.
1.701 January 2013 Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
1.800 May 2013 Addition of options: 100/60 and 100/100
1.900 Nov 2013 Correction to Safety Connection VN- on page 31
1.901 January 2014 Updated Section 3.4.2.2.a : Operation with an Isolated DC
Power Supply, Section 3.4.2.2.b: Operation with an Isolated
Battery Power Supply and Section 3.4.2.2.d: Operation with
a Non-Isolated DC Power Supply by Auto Transformer