ElmoMC ExtrIQ Digital Servo Drives-Eagle - Manual (Page 16)

Eagle Installation Guide Product Description
MAN-EAGIG (Ver. 1.902)
www.elmomc.com
16
2.4. System Architecture
Figure 1: Eagle System Block Diagram
2.5. How to Use this Guide
In order to install and operate your Elmo Eagle servo drives, you will use this manual in
conjunction with a set of Elmo documentation. Installation is your first step; after carefully
reading the safety instructions in the first chapter, the following chapters provide you with
installation instructions as follows:
• Chapter 3, Installation , provides step-by-step instructions for unpacking, mounting,
connecting and powering up the Eagle.
• Chapter 4, Technical Specifications , lists all the drive ratings and specifications.
Upon completing the instructions in this guide, your Eagle servo drives should be successfully
mounted and installed. From this stage, you need to consult higher-level Elmo documentation
in order to set up and fine-tune the system for optimal operation. The following figure
describes the accompanying documentation that you will require.
Main
12 to 390 VDC
Power Supply
24 VDC