ElmoMC SimplIQ Digital Servo Drives-Bell Getting Started - Manual (Page 22)

The SimplIQ for Steppers Getting Started & Tuning and Commissioning Guide
MAN-BELGS (Ver. 1.1)
22
For this purpose, use the Input Logic tab in the Smart Terminal.
Figure 19: Defining input logic
For a detailed description of the functions that may be assigned to digital inputs,
refer to the IL[N] command in the SimplIQ for Steppers Command Reference
Manual.
Correct digital input definitions help to guarantee that the drive
generates only safe motions in the course of the tuning process.
Incorrect digital input settings may prevent drive motion or tuning.
3.2.1 Brakes
If a brake is installed and you want to operate it automatically when the motor
starts, set it up now.
First select the brake engage and release delays. For this purpose select the
Protections>Brake tab in the Composer’s Smart Terminal:
Figure 20: The Brake tab