How to use this guide – ElmoMC Gold Line Digital Servo Drives-Gold Drum HV User Manual
Page 20
Gold Drum HV Installation Guide (EtherCAT and CAN)
Product Description
MAN-G-DRUMHVIG-EC (Ver. 1.202)
20
2.4. How to Use this Guide
In order to install and operate your Elmo Gold Drum HV (High Voltage) servo drive, you will use
this manual in conjunction with a set of Elmo documentation. Installation is your first step;
after carefully reading the safety instructions in the first chapter, the following chapters
provide you with installation instructions as follows:
•
Chapter 3 - Installation
, provides step-by-step instructions for unpacking, mounting,
connecting and powering up the Gold Drum HV (High Voltage).
•
Chapter 4 - Technical Specifications
, lists all the drive ratings and specifications.
Upon completing the instructions in this guide, your Gold Drum HV (High Voltage) servo drive
should be successfully mounted and installed. From this stage, you need to consult higher-level
Elmo documentation in order to set up and fine-tune the system for optimal operation.
•
The Gold Product Line Software Manual, which describes the comprehensive software used
with the Gold Drum HV (High Voltage)
•
The Gold Product Line Command Reference Manual, which describes, in detail, each
software command used to manipulate the Gold Drum HV (High Voltage) motion controller
•
The Elmo Application Studio Software Manual, which includes explanations of all the
software tools that are part of the Elmo Application Studio software environment