COATS 6450 3D - Manual (Page 27)

Important: Always read and follow the information box instructions. • 21
Specifi cations
Wheel Diameter Range
19.5 - 30 inches
Wheel Width Range
6 - 20 inches
Maximum Outside Tire Diameter
Up to 52 inches
Maximum Tire/Wheel Weight
500 pounds (227 Kg)
Mounting Shaft Diameter
2.0 inches (51mm)
Resolution
0.35 degrees
Balancing Display Increments
2.00 or 0.01 ounces
Electrical Requirements
230V ±10%, 1 Ph, 50/60 Hz, 20 amp, L6-20
230V ±10%, 3 Ph, 50/60 Hz 20 amp, L15-20
(use grounding type plug)
Footprint
62 inches x 70 inches
Shipping Weight
1.100 pounds (500 Kg)
Features
• Automatic Data Entry for Offset and Diameter -
Manual Entry Backup on all Parameters
• Static-on-Screen™
• Four Fixed Function Keys, Seven Program Keys for
user Friendly Operation
• Direct Select™ Weight Placement Location
Dynamic (Standard): Clip-on Weights
Alloy: User Defined
Static
Patch (Tire Weight): Static Only
• Behind the Spoke Weight Placement
• Automatic Start When Hood is Lowered
• Single Spin Balancing - Dynamic and Static
• Easy-To-Read Position Indicators
• Laser Guided Operation™ Tape-A-Weight
®
• Hood Safety Interlock System
• Extended Mounting Faceplate for Deeper Wheels
• Match Balance (Optimization)
• Operator Memory for Two Different Users
• User Friendly Weight Calibration
• No Bolt-down Installation
• Digital Motor Control
• Automatic Stop & Lock
• Automatic Indexing
• MET Lab Listing