COATS Series XR 1750, 1750-2D, 1750-3D, 1750-3DI Balancer - Manual (Page 37)

Important: Always read and follow the on-screen operating instructions. • 31
Video Balancer
Specifications
Cycle Time
8 seconds (average 50 pound tire)
Maximum Outside Tire Diameter
44 inches
Maximum Tire/Wheel Weight
160 pounds (72 kg)
Wheel Diameter Range (with Offset Arm or
Manual)
10 - 24 inches
Wheel Width Range
2 - 20 inches
Balancing Display Increments
0.25 or 0.01 ounces
Resolution (Non-Round Off Mode)
0.01 ounce, position 0.70 degrees
Resolution (Round Off Mode)
0.25 ounce, position 0.70 degrees
Temperature at Balancer Location
50 degrees - 105 degrees Fahrenheit
Mounting Shaft Diameter
40 MM standard
Electrical (115 V, 1 Ph, 60 Hz)
standard 15 AMP 3-prong outlet
Australia (230 V, 1 Ph, 50 Hz)
Shipping Weight
680 pounds (308 Kg)
Net Weight with Standard Accessories
465 pounds (211 Kg)
Balancer RPM
185 - 205 RPM
Features
• LCD Monitor with Swivel Adjustment
• Automatic Data Entry for Offset, Diameter, and
Width (if equipped), - Manual Entry Backup on all
Parameters
• Interactive Screens for all Modes and Functions
with Superior Graphic Displays
• Static-on-Screen™
• Four Fixed Function Keys, Seven Program Keys for
user Friendly Operation
• Many Balancing Modes
Dynamic (Standard): Clip-on Weights
4 Alloy: User Defined
2 PAX: User Defined
4 Static
Patch Type Weights: Static Only
Behind the Spoke Weight Placement
(All Modes with Inside Wheel Weights)
• Auto Start When Hood is Lowered
• Vertical Wheel Mounting System
• Single Spin Balancing - Dynamic and Static
• Easy-To-Read Position Indicators
• Interactive Tape-A-Weight™ Placement with Offset
Arm
• Cone Spring Permanently Retained in Faceplate
• Hood Safety Interlock System
• Extended Mounting Faceplate for Deeper Wheels
• Removable Center Shaft for Closed Center Wheels
• Match Mount (Optimization) Function with Weight
Optimization Program
• Can be Programmed for Four Different Users
• User Friendly Weight and Position Calibration
• Easy Calibration of Automatic Data Entry Devices
• No Bolt-down Installation
• Solid State Motor Control
• Econo Balance Mode (if available, model number
supports EB)
• UL/CSA Listing