Video balancer – COATS Series XR 1750, 1750-2D, 1750-3D, 1750-3DI Balancer User Manual

Page 19

Important: Always read and follow the on-screen operating instructions.

• 13

Video Balancer

Special Functions

Press the

key and select the SPECIAL FUNC-

TIONS option

for the following menu selections.

Figure 20 - Special Functions Screen

Customize the machine by following the on-screen

instructions for functions

and/or

Owner Address - This information appears on the
screensaver. It consists of three lines, each a
maximum of 30 characters.

Operators Name - Enter up to four different
machine user names, each a maximum of 15
characters. Follow the on-screen instructions to
complete the customization.

Figure 21 - Operator Name Entry Screen

Machine Self-Test - Provides software version,
technical, and other machine diagnostic informa-
tion. See DIAGNOSTIC PROCEDURES on page 28.

Static Unbalance Displayed - Toggles the display of
the Static-on-Screen™ value ON or OFF.

Set to ON.

Stop On Top - Toggle ON or OFF to automatically
stop the wheel near TDC (top-dead-center) for
outer weight placement.

Set to OFF.

Machine Self-calibration - calibrates the weight

amount and placement. See MACHINE SELF-CALI-
BRATION AND SERVICE ADJUSTMENTS on page
22 for more information.

Important: Always verify the wheel dimensions
carefully before proceeding with the Machine Self-
calibration.

Additional Functions

Press the

key and select the CYCLE HISTORY

option

for the following menu.

Figure 22 - Cycle History Screen

Cycle History - Select option

to set the

number of spins between calibrations (500 - 5000
@ 500 spin increments).

Also, the operator can view the following information

when the CYCLE HISTORY option

is selected.

• The number of daily spins that is automatically reset

after switching the machine off.

• View the number of spins since calibration.

• View the total number of spins.

MENU

Shown with Recommended Settings