chiliGREEN W25BBZ W7 - Manual (Page 226)

Troubleshooting
8 - 12 Problems and Possible Solutions
8
The Bluetooth module is off after
resuming from Sleep. The Bluetooth module’s default state will be off after resuming from the Sleep
power-saving state. Use the key combination (Fn + F12) to power on the
Bluetooth module after the computer resumes from Sleep.
I cannot obtain high speed Bluetooth data
transfer. To obtain high speed Bluetooth data transfer take into account the following:
• To achieve high speed transfer speeds, both devices must sup-
port high speed data transfer (i.e both the computer and the
Bluetooth compatible device you are connecting to).
• To obtain high speed data transfer make sure that both the com-
puter’s WLAN and Bluetooth modules are powered on (use
the Fn + F11 to toggle power to the WLAN module and Fn + F12
to toggle power to the Bluetooth module).
• Check your Bluetooth compatible device’s documentation to con-
firm it supports high speed data transfer, and for configuration
information.
Problem Possible Cause - Solution