CHAMPION USN72 User Manual

Page 189

Table Limit Switch (TLS) Installation Instructions

Section 4: Assembling the Table Limit Switch

(continued)

2. Refer to Fig. 6, Installing the TLS Conduit Adapter, below.

Part (A), which is included in the kit is the TLS Conduit Adapter. The adapter fits into the
bottom of the TLS Part (B).

3. Part (C), is a liquid tight 1/2" elbow. It is not included in the kit and must be supplied by

the installer.

4. To assemble the adapter, thread Part (C) into Part (A), then insert Part (A) into the TLS body.

5. Final assembly is performed after the electrical wiring is connected to the switch.

Fig. 6 -

Installing the TLS Conduit Adapter