Attention – CHAMPION USN72 User Manual

Page 185

1-7/8"

48mm

Backsplash

Dish Table

WALL

3765 Champion Boulevard
Winston-Salem, NC 27105
Toll-free:

1 (800) 858-4477

Fax:

(336) 661-1660

Table Limit Switch (TLS) Installation Instructions

for Service Kit P/N 418404

Form No. 900948_v10110

NOTE:

These instructions pertain to USN72 Rack Conveyor Dishwashers.

ntroduction:

A table limit switch (TLS) should be installed on the dishwasher unload dish table to prevent

dishwasher conveyor jams if dish racks accumulate as they exit the dishwasher. The TLS

shuts down the dishwasher conveyor drive until dish racks are removed.

! ATTENTION !

This Kit will not work if the distance between the backsplash and the wall is less than 1-7/8" [48mm].

See Section 1: Checking Wall Clearance before beginning the TLS installation.

Fig. 1 -

Check wall to backsplash clearance

Section 1: Check Wall Clearance

Before beginning the installation, measure the distance from the wall to the dish table

backsplash. The minimum clearance is 1-7/8" [48mm]. See Fig. 1 below.

This kit will not work if the proper clearance is unavailable.