CHAMPION USN72 - Manual (Page 164)

2
USN72 Booster Conversion Instructions - Kit P/N 453393
NOTE:
The installation will require parts and materials that are not supplied by the factory, such as pipe
sealing, water-proofing materials, and Type LSTSGU-3 Cable. Make sure that any materials are
approved by your facility before the installation.
NOTE:
Observe all safety regulations and procedures when moving and placing the machine.
CAUTION:
To prevent damage to the machine, do not lift the machine by any of its piping or electrical
conduit.
IMPORTANT:
Plan the route used to transport the main booster assembly.
Make sure that all passageways and hatches provide the needed clearances to avoid damage to the main
booster assembly.
WARNING!
Electric shock may cause death or serious injury.
Do not work on energized circuits. Turn off all main power
service disconnects, lock them out and place a tag on
the switch and/or breaker to indicate that work is being
performed on the circuit.
WARNING!
Death or serious injury may result if safety devices are not working.
NEVER operate the machine unless all safety devices are in good working
condition and all safety covers are in place on the machine.
ATTENTION!
Utility connections must be performed by authorized installers who will follow all
electrical, plumbing, sanitary, safety procedures and regulations.
Safety Instructions