CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 48)

System Setting
48 |
System Setting
System Setting
You can configure the settings of date/time, system management, and keyboard controller.
\ \ Date/Time
Specify the current date and time.
1. From - , select
.
2. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to change the time or set
the options as necessary.
i
DATE/TIME : Set the current time and date.
Click< > to adjust the time manually.
i
DATE FORMAT : specify the date format.
i
TIME FORMAT : specify the time format.
i
TIME SERVER : obtain the current time from the
time server. Click < > to get the current time.
i
AUTO TIME SYNC : automatically synchronize the
time with the time server at a specific time.
i
SYNC AT : Set the time to sync with the time
server.
i
TIMEZONE : specify the GMT standard time for
your local area.
i
DST : You can set up or release the DST (Daylight
Saving Time).
Both and will be
enabled only if the DVR is connected to the Internet.
3. To apply the change, click in the bottom of
the screen.
4. When done, press the [EXIT] button on the remote control or click in the lower screen. The confirmation
message appears and you will return to the previous menu.