CCTV Camera Pros iDVR-PRO A Series DVRs - Manual (Page 36)

System Setting
36 |
System Setting
\ \ Enabling Privacy Mask
For privacy purposes, you can specify masking area for a selected camera's video.
1. From - , select
.
2. Use [ ▲▼◀▶ /ENTER] buttons of the remote or the
mouse to set channels enabled, mask color and its
area.
i
ACTIVATION : Turns on or off the motion detection
sensor in the specified privacy area.
i
MASK COLOR : Select the color of the masked
area, which will be displayed on the monitor.
3. To apply the change, click in the bottom of
the screen.
4. When done, press the [EXIT] button on the remote control or click in the lower screen to return to the
previous menu.
\ \ Setting the Privacy Masking Area
You can specify the privacy masking area.
1. Click on the tab on the right side to
display the area setup page.
2. When using the remote, press the [Select] button to
show the selector first.
3. Use direction keys to move to the desired channel,
and press the [Select] button to begin area setup.
Use direction keys to set the masking area. When
using the mouse, hold the mouse left button and
drag to set or cancel the masking area.
4. Selecting masked area again will exclude the
corresponding block from the masking area.