C.3.3. configuration – Atop Technology SE5404D User manual User Manual

Page 83

Text mode
Original mode

User manual Version 1.3

4-Port DIN-Rail Serial Device Server SE5404D

- 82 -

C.3.3. Configuration

This function is for device configuration to set up parameters, to import and to export the parameters, and to
set up some options. Here is the list of configurations:

“Network”, “SNMP”, “COM Port”, “Locate”, “Reset”,

“Import Setting”, “Export Setting”, “Virtual COM”, “Config by browser” and “Options.” Users can carry out a
configuration operating through menu or by clicking the corresponded button on the toolbar, shown as the
figure below: