Appendix b: upgrade system firmware, Ritical, Ssues of – Atop Technology SE5404D User manual User Manual
Page 76: Pgrading, B.1 upgrade procedure, B.2 critical issues of upgrading
User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 75 -
Appendix B: Upgrade System Firmware
After the new version of firmware is released, customers can download from
After you download
the firmware, please follow these instructions listed below.
B.1 Upgrade Procedure
Please follow Appendix C if you want to use Serial Manager to upgrade firmware. Follow the upgrading
procedures below to upgrade to the latest firmware using a batch file:
Make sure the PC and the SE5404D series on the same network. Use command ping or Serial Manager
Utility program to verify their availability.
Edit
“dll.bat ” to fit the system requirements, Be sure to save ones modification
Run linux_dl ,the following screen shall appear .
For example：linux_dl_v2 zImage.bin 10.0.50.100
Note :
“linux_dl_v2” is the upgrade executable and zImage.bin is the firmware file name;
xxx.xxx.xxx.xxx is the IP address of SE5404D seriess
SE5404D will automatically restart each time the firmware is successfully download completed. When you get a
new software version, please follow the procedure below to upgrade your SE5404D.
B.2 Critical Issues of Upgrading
If the upgrade is successful, SE5404D shall program the flash memory and the buzzer will beep 1 time before