13 configuring e-mail – Atop Technology SE5404D User manual User Manual

Page 26

User manual Version 1.3

4-Port DIN-Rail Serial Device Server SE5404D

- 25 -

Figure 3.19 Alert Settings by Telnet

3.2.13 Configuring E-mail

Operation: Main [4]Alert Settings[1]E-mail Settings

One may

configure the “Sender’s E-mail address” that it should have on the SMTP server (Mail Server) where

allowed to sent out the email by sender’s E-mail address. The SE5404D allow to definite the receiver up to 5. Also
the E-mail notification will be sent to the e-mail account their obtain

ed in “Receiver’s E-mail address 1”, “Receiver’s

E-

mail address 2”, “Receiver’s E-mail address 3”, “Receiver’s E-mail address 4” and “Receiver’s E-mail address 5”.

Figure 3.20 Configuring E-mail by Telnet

One may configure

Mail Server and checking on “My mail server requests authentication” field to obtain User

name and Password.