Fcc warning – Atop Technology SE5404D User manual User Manual

Page 3

User manual Version 1.3

4-Port DIN-Rail Serial Device Server SE5404D

- 2 -

Thank you for purchasing SE5404D Serial Device Server product. This document intends to provide customers
with brief descriptions about the product and to assist customers to get started. For detail information and
operations of the product, please refer to the product user’s manual in the product CD or diskette.

FCC WARNING

Class A for Serial Device Server (Model SE5404D series)

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15

of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses and radiates radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expenses.

A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the

nearby radio and television reception. It is essential that only the supplied power cord can be used.

Use only shielded cables to connect other devices to this equipment by RS-232 or RS-485 ports.

Be cautioned that changes or modifications not expressly approved by the party responsible for compliance could

void your authority to operate the equipment.