5 diagnostics, 1 using standard ping command, Diagnostics – Atop Technology SE5001A User manual User Manual
Page 66
User Manual Version 1.0
SE5001A Serial Device Server
64
5 Diagnostics
There are several ways to can check the status and availability of the serial device server.
5.1 Using Standard Ping Command
From the Windows Start menu, select Run
and type in “ping
If the serial device server can receive ping requests sent from the host, it will reply to the ping message (Figure
6.1). If the ping request cannot reach the serial device server, timed out message will show (Figure 6.2).
Figure 6.1 Successful Ping Reply
Figure 6.2 Ping Command Failed