Tcp server application: enable reverse telnet – Atop Technology SE5001A User manual User Manual
Page 43

User Manual Version 1.0
SE5001A Serial Device Server
41
3.3.15. TCP Server Application: Enable Reverse Telnet
Reverse Telnet application is useful if a telnet program is used to connect to SE5001A and the serial interface of the
SE5001A is connected to a Terminal Server. Telnet programs in Windows / Linux usually require special
handshaking to get the outputs and formatting show properly. SE5001A will interact with those special commands
(CR/LF commands) if Reverse Telnet is enabled.
Figure 3.30 TCP Server with Reverse Telnet Enabled
to configure SE5001A in TCP Server mode properly.
Check Enable Pair Connection to enabled Pair Connection application in SE5001A.
Scroll to the bottom of the page and click on “Save Configuration” button to save the changes.