Atop Technology SE5001A User manual User Manual
Page 42
User Manual Version 1.0
SE5001A Serial Device Server
40
3.3.14. TCP Client Application: Configure SE5001A as a Pair Connection Slave
A Pair Connection Slave (Figure 3.29) needs to pair up with a Pair Connection Master. Please setup a Pair
Connection Master first before proceeding.
Figure 3.29 TCP Client with Pair Connection Enabled
to configure SE5001A in TCP Client mode properly.
Check Enable Pair Connection to enabled Pair Connection application in SE5001A.
Scroll to the bottom of the page and click on “Save Configuration” button to save the changes.
Match the Destination IP and Port here
with the settings of Pair Connection Master’s IP and Listening
Port setup previously.