Anchor EVENT SERIES - PROFILE SIZE: 20M - 220X100X4 - 3M UPRIGHTS - Manual (Page 40)

Spanning the world.
BT 2000 240/300 570/627
39
5.3 Stretching of the roof cover (model with rubber tensioning)
There are 2 variations to distinguish among the roof covers:
a) With fixed bracing
b) With rubber tensioning
If your tent has the model a) fixed bracing, then skip this point and go on
with the mounting stepts of point 5.2
Work from the outside to the inside by hanging up the elastic chock cord.
5.3.1 Pull the elastic chock cord of the roof cover on one tent side around
the eave purlin and hang up into the hooks (pic. 24).
5.3.2 Hang up the elastic chock cord to the opposite of the roof cover
according the point 5.3.1.
5.3.3 Repeat the points 5.3.1 and 5.3.2 for all the roof covers.
5.3.4 After the stretching of the roof covers, check once more the elastic
chock cords of the separate covers and stretch them (pic. 25).
5.3.5 Connect the tabs of the roof covers, which have buckle straps or bur
band with the equivalent opposite parts of the next roof cover (pic.
23).