AirLive WIAS-3200N v2 - Manual (Page 93)

5 Configure Wireless Connection
87 AirLive WIAS-3200N v2 User’s Manual
5.3.1.1 Security
ESSID: Extended Service Set ID indicates the SSID which the clients used to connect
to the VAP. ESSID will determine the service type of a client which is assigned to the
specified VAP.
Enable AP: By default, it’s “Disable” for VAP1 ~ VAP3. The VAP0 always enabled.
Select “Enable” to activate VAP or click “Disable” to deactivate this function
Hidden SSID: Select this option to enable the SSID to broadcast in your network.
When configuring the network, it is suggested to enable this function but disable it
when the configuration is complete. With this enabled, someone could easily obtain
the SSID information with the site survey software and get unauthorized access to a
private network. With this disabled, network security is enhanced and can prevent the
SSID from begin seen on networked.
Client Isolation: Select Enable, all clients will be isolated from each other that mean
all clients cannot reach to other clients.
WMM: Select Enable, the packets with QoS WMM will has higher priority.
IAPP Support : Inter Access-Point Protocol is designed for the enforcement of unique
association throughout a ESS(Extended Service Set) and for secure exchange of
station's security context between current access point (AP) and new AP during hand
off period.