AirLive WIAS-3200N v2 - Manual (Page 86)

5 Configure Wireless Connection
AirLive WIAS-3200N v2 User’s Manual
80
5
5. Configure Wireless
Connection
5.1 General Setups
The administrator can change the data transmission, channel and output power settings for
the system. Please click on Wireless > General Setup and follow the below setting.
MAC address: The MAC address of the Wireless interface is displayed here.
Band Mode: Select an appropriate wireless band; bands available are 801.11b,
802.11b/g, 802.11b/g/n and 802.11n.
Transmit Rate Control: Select the desired rate from the drop-down list; the options
are auto or ranging from 1Mbps to 54Mbps for 802.11b/g modes, or 1Mbps to 11Mbps
for 802.11b mode.
Country: Select the desired country code from the drop-down list; the options are US,
ETSI and Japan.
Channel: The channel range will be changed by selecting different country code. The
channel range from 1 to 11 for US country code, or 1 to 13 for ETSI country code, or 1
to 14 for Japan (Channel 14 only for 802.11b Rate).
Auto Scan: Click this button, the channel will be changed to suitable channel.
AP List: Click this button, the system will show current all AP list. Click Rescan button
to rescan list, click Close button to close window