AirLive WIAS-3200N v2 - Manual (Page 21)

3 Configure Hotspot to Network
15 AirLive WIAS-3200N v2 User’s Manual
3.2.4 PPTP
The Point-to-Point Tunneling Protocol (PPTP) mode enables the implementation of secure
multi-protocol Virtual Private Networks (VPNs) through public networks.
Username : Enter User Name for PPTP connection .(You can set 0-32 alphanumeric
and ~!@#$%^*()_+-:<>?[]/;,.= specific characters)
Password: Enter Password for PPTP connection. (You can set 0-32 alphanumeric
and ~!@#$%^*()_+-:<>?[]/;,.= specific characters)
PPTP Server IP Address : The IP address of the PPTP server
My WAN IP : The IP address of the WAN port
My WAN IP Netmask : The Subnet mask of the WAN port
MTU: The range is 1400-1460, default is 1460 bytes. MTU stands for Maximum
Transmission Unit. Consult with WISP for a correct MTU setting.
MPPE Encryption: Microsoft Point-to-Point Encryption (MPPE) encrypts data in
Point-to-Point Protocol (PPP)-based dial-up connections or Point-to-Point Tunneling
Protocol (PPTP) virtual private network (VPN) connections. 128-bit key (strong) and
40-bit key (standard) MPPE encryption schemes are supported. MPPE provides data
security for the PPTP connection that is between the VPN client and the VPN server.
3.2.5 DNS
You can select “No Default DNS Server” or “Specify DNS Server IP” radial button as
desired to set up system DNS.
Primary: The IP address of the primary DNS server.
Secondary: The IP address of the secondary DNS server.