AirLive WIAS-3200N v2 - Manual (Page 100)

5 Configure Wireless Connection
AirLive WIAS-3200N v2 User’s Manual
94
Service: By default, it's “Disable”. To “Enable” to activate WDS.
Enable: Click Enable to create WDS link.
WDS Peer's MAC Address: Enter the MAC address of WDS peer.
Description: Description of WDS link.
*Note: If WDS activate, the Security Type only support “WEP” on VAP0.
Change these settings as described here and click Save button to save your changes.
Click Reboot button to activate your changes.
5.3.2 Wireless MAC Filter
For each Virtual AP, administrators can configure general settings and security type.
Click Wireless > Virtual AP, click “Edit” of Virtual AP List and then Virtual AP
Configuration page appears.