AirLive WIAS-3200N v2 - Manual (Page 30)

3. Configure Hotspot to Network
AirLive WIAS-3200N v2 User’s Manual
24
Lease Time: The IP addresses given out by the DHCP server will only be valid for the
duration specified by the lease time. Increasing the time ensure client operation
without interrupt, but could introduce potential conflicts. Lowering the lease time will
avoid potential address conflicts, but might cause more slight interruptions to the client
while it will acquire new IP addresses from the DHCP server.
3.4.7 Static Lease List
If you want a computer or device to always have the same IP address assigned, you can
create a static lease. The system will assign the IP address only to that computer or device.
There are maximum 50 rules allowed in this list.
Hostname: Enter the hostname of the computer or device.
IP Address: Enter the IP address you want to assign to the computer or device. This
IP Address must be within the DHCP IP Address Range.
MAC Address: Enter the MAC address of the computer or device.
Actions: Click an action button to perform the appropriate action.
Delete: Click this button to remove the lease for a specific LAN device and free an
entry in the lease table.
Change these settings as described here and click Save button to save your changes.
Click Reboot button to activate your changes.
3.5 Dynamic DNS
Dynamic DNS allows you to make an assumed name as a dynamic IP address to a static
hostname. Please click on System > DDNS and follow the below setting.