AirLive WIAS-3200N v2 - Manual (Page 31)

3 Configure Hotspot to Network
25 AirLive WIAS-3200N v2 User’s Manual
Enabled: Select Enable for DDNS function, each time your IP address for WAN is
changed, the information will be updated to DDNS service provider automatically.
Service Provider: Select the correct Service Provider from the drop-down list, here
included are dyndns, dhs, ods and tzo embedded in the WIAS-3200N v2.
Hostname: This field represents the Host Name you register to Dynamic-DNS service
and expect to export to the world. (You can set 1-32 alphanumeric and @-_. specific
characters)
User Name & Password: User Name and Password is used as an identity to login
DDNS service. (You can set 1-32 alphanumeric and ~!@#$%^*()_+-:<>?[]/;,.= specific
characters)
Change these settings as described here and click Save button to save your changes.
Click Reboot button to activate your changes
3.6 Management
The administrator can later obtain the geographical location of the system via the
information configured here. The administrator also can change system password and
configure system login methods. Please click System > Management and follow the
below settings.