AirLive WIAS-3200N v2 - Manual (Page 160)

Appendix G. Network Configuration on PC & User Login
AirLive WIAS-3200N v2 User’s Manual
154
Step 3.
Using DHCP: If you want to use
DHCP, click on the IP Address tab
and choose “Obtain an IP address
automatically”, and then click OK.
This is also the default setting of
Windows. Then, reboot the PC to
make sure an IP address is obtained
from WIAS-3200N v2.
Using Specific IP Address: If you
want to use a specific IP address,
acquire the following information
from the network administrator: the
IP Address, Subnet Mask and DNS
Server address provided by your
ISP and the Gateway address of
WIAS-3200N v2.
*Caution!!
If your PC has been set up
completely, please inform the
network administrator before
proceeding to the following steps.