AirLive WIAS-3200N v2 - Manual (Page 16)

2. Getting Started with Easy Setup Utility
AirLive WIAS-3200N v2 User’s Manual
10
2.7 Access Web Management Interface
When Hotspot mode is activated, the system can be configured as a Wireless Hotspot
Gateway. This section provides information in configuring the Hotspot mode with graphical
illustrations. WIAS-3200N v2 provides functions as stated below where they can be
configured via a user-friendly web based interface.
System
Service
Domain
Wireless Advanced Utilities Status
WAN
Service
Domain
General
Setup
DMZ Profile Setting Overview
WAN Traffic Authentication
Advanced
Setup
IP Filter
Firmware
Upgrade
Extra Info
LAN/VLAN Privilege List
Virtual AP
Setup
MAC Filter
Network
Utility
Event Log
DDNS
Walled
Garden
Associated
Clients
Virtual Server
Format
Database
Management Notification WDS Status Time Policy Reboot
Time Server Online Users
SNMP Log Info
*Note: After finishing the configuration of the settings, please click Save button and pay
attention to see if a Reboot message appears on the screen. If such message appears,
system must be restarted to allow the settings to take effect. All online users will be
disconnected during restart.
WIAS-3200N v2 supports Web Management Interface (WMI) configuration. Upon the
completion of hardware installation, WIAS-3200N v2 can be configured via web browsers
with JavaScript enabled such as Internet Explorer version 6.0 and above or Firefox.
Default LAN interface IP address is 192.168.1.254.