2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 - Manual (Page 75)

Free minutes option 4.6
75
DD: day in month
hh: hour
mm: minute
When the date is valid, the confirmation - OK is generated
otherwise there is there confirmation – bad.
Refill now
The command is intended for refilling of free minutes banks with predefined
values (free minutes) manually just now. This command is to be used for
initialization or for manual handling of system.
Code for setting: *07#
The confirmation - OK is generated
Setting of free minutes option - PCManager
All parameters, which can be set up by DTMF can be set up by PCManager
too. There is page in PCManager – Call table – Free minutes bank for this
setting.
Free minutes bank – PCManager only
In Call table – FXS routing table is added column “Free minutes bank”.
Called numbers can be associated to one of four groups (bank). All calls to
numbers in the same bank are handled the same way according to free
minutes counting rules specific for bank. This table is usually preset by
supplier.
Setting options: 0-4 (0 – no bank selected, free minutes inactive)
Default setting: 0
Time setting
In Monitor you can check the actual time on PC and on Gateway
There are two commands for time setting in Monitor:
Synchronize to PC: The time in gateway is set according to actual time on PC
Manual setting: Setting date and time manually