Table of parameters 3.2 – 2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 User Manual
Page 40

Table of Parameters
3.2
40
Accelerate connection establishing by knowing the number length for the given
prefix;
Accelerate connection establishing by allowing to terminate dialing with a #;
Modify the number to be dialed by removing and/or adding prefix.
Set tariff metering for the given prefix
Set time limit for call
Bar the number to be dialed - the calling subscriber tone;
Route the call to GSM network, or to PBX through the FXO interface;
Accelerate connection establishing by knowing the number length for the given
prefix;
Accelerate connection establishing by allowing to terminate dialing with a #;
Modify the number to be dialed by removing and/or adding prefix.
Set tariff metering for the given prefix
Set time limit for call
Every table line includes a phone number prefix (of variable length) and other
parameters. The parameters define SmartGate's behavior in case the beginning of
the dialed number matches this prefix on the same table row. The table contains
120 rows for up to 120 different prefixes.
There may be exceptions to the rule - a number may start with the same digits but
has to be served in a different way. Any table row that starts with the same prefix
followed by one or more digits is considered an exception of the line with shorter
prefix.