2N Fixed line replacement with 2N SmartGate - Manual v1.1.2 - Manual (Page 47)

Table of Parameters 3.2
47
Callback he just doesn't hang up and the call is handled as a standard incoming
call.
Setting options: 0-255 s
Setting step: 1 s
Default setting: 5 s
FAX from GSM route to Function No.: 509
Incoming FAX call from GSM network you can route to telephone line FXS, or to
COM (PCFax). Parameter takes place only on models with FAX converter, on
other models FAX calls are routed always to COM.
Setting options: FXS line - Incoming FAX call is routed to FAX machine
on FXS line.
COM - Incoming FAX call is routed to COM
Default setting: FXS line
DATA from GSM route to Function No.: 508
Incoming DATA call from GSM network you can route to telephone line FXS, or to
COM. Parameter takes place only on models with FAX/DATA converter, on other
models DATA calls are routed always to COM.
Setting options: FXS line - Incoming DATA call is routed to modem on
FXS line.
COM - Incoming DATA call is routed to COM
Default setting: FXS line
Caution
 Configuration using phone line programming (DTMF) is applicable for line
„Other prefixes‟ only.
CLI – calling number Function No.: -
Fill in CLI, to route the call according to parameter on the same table line. It is
possible to fill in only prefix for group of CLI's. If parameter "Substring" = 0, you
must fill prefix as you see it on display of your mobile phone - It means inclusive
of + and international prefix if they are included. If parameter "Substring" > 0,
2N® SmartGate searches filled prefix as substring of the received CLI, but max.
to position given by "Substring" parameter. Positions are counted from zero. See
examples in "Substring" parameter hint.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
Substring Function No.: -
Parameter is used to make filling CLI prefix easier. If parameter "Substring" > 0,
2N® SmartGate searches filled prefix as substring of the received CLI, but max.
to position given by "Substring" parameter. Positions are counted from zero.
for example received CLI +420603198222 corresponds with settings:
CLI - calling number
Substring
+420603198222 any setting
+420603 any setting