Google Outbound Services Configuration Guide - Manual (Page 23)

Microsoft Exchange 2003 (Private DNS Method) 25
7. Click the Connection button.
8. If the Connection list is set to “Only the list below”, then add the same IP
ranges.
9) Click OK to get back to the Access tab and click OK to close the Default SMTP
Virtual Server Properties.
10) If the reinjection servers are not outbound servers, then configure all servers
along the mail flow between reinjection and the outbound server to allow the
injection server to relay mail traffic through them.
11) Stop and restart the SMTP services.
Register Your IP in the Administration Console
After you have set up reinjection, register the IP address of your outbound mail
server in the Administration Console. Do not change your external DNS until your
IP address is registered in Outbound Servers. This can take about 15 minutes.
For instructions on how to register your IP in the Administration Console, see
“Register Your IP in the Administration Console” on page 15.
Set Up Private Outbound DNS
Route mail to Outbound Services by setting up an external DNS server. For an
overview of Private Outbound DNS concepts, see “Option 1: Set Up Private
Outbound DNS” on page 16.
1. Select the Start Menu -> Programs -> Microsoft Exchange -> System
Manager.