JLG 45e ANSI Parts Manual - Manual (Page 65)

3120744 2-21
S
E
C
T
I
O
N
2
T
U
R
N
T
A
B
L
E
SECTION 2 TURNTABLE
FIGURE 2-8. SWING BEARING ASSEMBLY - MODELS 40ELECTRIC AND 45ELECTRIC (POST
PRODUCTION SERVICE REPLACEMENT)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
Note: Visually identify the brand before ordering
replacement parts. Ref.
0440339 SWING BEARING ASSEMBLY (PERFECTION GEAR)
(POST PRODUCTION) Ref. C
1 7026042 Bearing, Cup 2
7026043 Bearing, Cone 2
2 7027356 Adapter, Motor 1
3 7027361 Seal 2
4 7027354 Cap, End 1
5 0641510 Bolt 5/16”-18NC x 1 1/4” 2
6 0641812 Bolt 1/2”-13NC x 1 1/2” 2
7 70000865 Plug 1
8 7027360 Seal 1
9 7027359 Straight Fitting, Grease 2
2160003 Fitting, Grease - 45° 2
10 7027358 90° Fitting, Grease 2
11 Not Available Housing 1
12 4891500 Flatwasher 5/16” (Hardened) 2
13 7027363 Gear, Worm 1
14 70000868 Ring, Bearing 1
15 7027352 Gasket (.010 - Brown) A/R
16 7027351 Gasket (.0075 - Clear) A/R
17 7027350 Gasket (.005 - Blue) A/R
18 7027353 Gasket (.020 - Yellow) 1
0440203 SWING BEARING ASSEMBLY (KAYDON) (PRODUC-
TION) Ref. G
Note: When replacing major components, consider
replacing with p/n 0440339 Complete Bearing
Assembly.
101 7012597 Swing Rotation Box Assembly 1
102 7023484 Cap, End 1
103 Not Available Bolt 1/2”-13NC x 1 1/2” Grade 8 2
104 Not Available Gear, Worm 1
105 7012654 Seal, Outer - Capped End (1.75 O.D.) 1
106 7016682 Shims Kit (Includes Qty 3 each of .005, .0075 &
.010 Shims) 1
107 70001677 Cup, Bearing 2
108 90206369 Cone, Bearing 2
109 7016676 Seal, Outer - Capped End (2.063 O.D.) 1
110 Not Available Ring, Retaining 1
111 7012655 Seal, Outer - Motor End 1
112 2160001 Fitting, Grease - 90° 2
113 Not Available Lockwasher 1/2” 2
114 Component Options: 1
Not Available Plug, Pipe
2160001 Fitting, Grease - 45°
115 7012596 Bearing, Turntable 1