JLG X14J Operator Manual - Manual (Page 113)

X14JR0420113
BOOM LIFT MODELS X14J
JLG
neer.
This inspection must:
1.
consider the service history of the aerial platform in terms of hours of service,
severity of use, and number and variability of users;
2. review the inspection and maintenance record of the aerial platform;
3. verify the efficiency of all operating controls;
4. perform a visual inspection of the aerial platform;
5. consider recommendations of the manufacturer regarding the aerial platform,
including manufacturer’s safety bulletins.
E – MAINTENANCE
Before adjustments and repairs are started on the aerial platform, the following precautions
must be taken:
1. The power system must be stopped, and the starting devices must be rendered inopera‑
tive;
2. All controls must be in the OFF position and all operating systems must be secured
against accidental activation by brakes, chocks or other means;
3. Elevating and rotating assembly and platform must be completely lowered, if possible,
or otherwise secured by blocking or propping;
4. The hydraulic oil pressure must be released from all hydraulic circuits before loosening
or removing hydraulic components;
5. Safety props or latches must be installed where applicable;
6. Other precautions must be adopted as specified in the user and operation manual.
109